Hot search:

汽车零件检具

News

Product

Key

Contact

Enterprise name: Nantong Rong Ming Checking Fixture Co., Ltd.

Contact: Lu Chunrong

Phone: 0513-81733686

Mailbox: luchunrong@rongmingcf.com

Web site: www.rongmingcf.com

Fax: 0513-81733686

Address: 22 groups of Peach Village, Chengnan street, Rugao, Nantong.

Maintenance method of standard parts for automobile inspection equipment

Your current position: Home >> News >> Industry news

Maintenance method of standard parts for automobile inspection equipment

Date of release:2018-06-07 Author: Click:

Maintenance method of standard parts for automobile inspection equipment


What are the standard parts maintenance methods for vehicle inspection tools? With the production of automobile inspection equipment and the continuous improvement of precision, many standard parts of automobile inspection equipment must be fully maintained to prolong its service life. The following car manufacturers are going to give you a brief introduction of the maintenance methods for automobile inspection tools.


1. Keep the standard parts of automobile inspection tools dry.


The storage temperature of vehicle inspection tools must be between 10-60 degrees below zero; the temperature must be at 60 degrees; the particles must not exceed 2%.


2. Basic maintenance of standard parts for automobile inspection equipment


To do a good job in the external cleaning of the simulation blocks for automobile inspection tools, some floor, pin and pin position must be paid attention to, and the active parts which need to be disassembled are placed in the corresponding position.


3, vehicle inspection and maintenance time can be divided into six months or 1 years to deal with once.


If there is any wear and wear on the pin hole of the vehicle inspection tool, there is a problem to be replaced immediately; check the precision slideway without loosening, add the lubricating oil in time, check the marking scale of the vehicle inspection tool and the coating and wear and tear of the coating; check whether the positioning datum is rusty, and some words will be replaced or played immediately. Grinding.


The address of this article:http://en.rongmingcf.com/news/380.html

Key word:Automobileinspectiontool,Autopartsinspectiontool,Automobileinspectionequipmentmanufacturer

Recently browse:

Contact: Lu Chunrong

Phone: 0513-81733686

Mailbox: luchunrong@rongmingcf.com

Web site: www.rongmingcf.com

Address: 22 groups of Peach Village, Chengnan street, Rugao, Nantong.

Hot product  |  Main area: taicang changshu kunshan tianjin jiangsu wuhan wuzhong shanghai beijing zhangjiagang
  • Service
  • number
    15062755302
  • Message
  • Online Service