Hot search:

汽车零件检具

News

Product

Key

Contact

Enterprise name: Nantong Rong Ming Checking Fixture Co., Ltd.

Contact: Lu Chunrong

Phone: 0513-81733686

Mailbox: luchunrong@rongmingcf.com

Web site: www.rongmingcf.com

Fax: 0513-81733686

Address: 22 groups of Peach Village, Chengnan street, Rugao, Nantong.

General rules for design of welding fixtures

Your current position: Home >> News >> Industry news

General rules for design of welding fixtures

Date of release:2018-07-06 Author: Click:

The first point, the design of welding fixture is designed to meet the requirements of the welding process. The fixture design drawing method should carry out the national mechanical drawing standard.


The second point is that the fixture is easy to operate, and the tooling system must meet Ergonomics requirements after the design is completed.


The third point is that the fixture should have enough assembly and welding space, and the solder joints should be easy to arrange when arranging.


Fourth, the fixture itself must have good manufacturability and high mechanical efficiency.

9-1.jpg

Fifth points, all tooling and fixture, control panel and panel display labels are required to be in Chinese. If the use of English should be recognized by the owner.


Sixth points, all drawings and documents in the size and engineering units require the metric system, all fasteners must be metric. In the design, the owner should be approved in writing before using the non metric system.


The seventh point, fasteners: adopt the national standard six angle screw and the cylindrical inner thread locating pin, and all the fastening places should adopt the loosening prevention measures.


Eighth, we must try to choose the general and standardized clamping mechanism and standard parts, and make the parts easily interchangeable and easy to maintain.


The ninth point, the rotary fixture requires the intake from the rotary center (using a special intake mechanism, which can be rotated at any angle), and the height of the rotary fixture can be adjusted.


Tenth, manual clamping fixture selection generally recommend the use of GOOD HAND standard products.


The eleventh point is that the clamping cylinder usually adopts a buffer mechanism to prevent the workpiece from being damaged when clamping the workpiece rapidly.


The address of this article:http://en.rongmingcf.com/news/391.html

Key word:Automobileinspectiontool,Autopartsinspectiontool,Automobileinspectionequipmentmanufacturer

Recently browse:

Contact: Lu Chunrong

Phone: 0513-81733686

Mailbox: luchunrong@rongmingcf.com

Web site: www.rongmingcf.com

Address: 22 groups of Peach Village, Chengnan street, Rugao, Nantong.

Hot product  |  Main area: taicang changshu kunshan tianjin jiangsu wuhan wuzhong shanghai beijing zhangjiagang
  • Service
  • number
    15062755302
  • Message
  • Online Service